Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Overheating 95 XJ

Tech Talk for Jeep owners.

Moderator: GUtripper

Post Reply
Posts: 7
Joined: Wed Nov 02, 2005 10:21 pm
Location: Perth, W.A.

Overheating 95 XJ

Post by Jeff in WA »

Hi

Have a 95 XJ, put a new radiator and thermo in it, and it now boils as easy as pie. The block was flushed. Even with the thermo removed it still boils. What did I do wrong?

Hope someone out there as ideas.

Jeff
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

thermostat upside down? headgasket?
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

radiator hoses colapsing dose it have a viscous fan it may be stuffed
Posts: 7
Joined: Wed Nov 02, 2005 10:21 pm
Location: Perth, W.A.

Post by Jeff in WA »

We took the thermo out, still the same problem. The viscous fan is okay, the thermo fan is okay. Headgasket has been checked.

Might just sell it. Pity it's economical, drives nicely, does everything right, bar the overheating.

Jeff
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

have ya had the radiator properly cleaned?
Posts: 7
Joined: Wed Nov 02, 2005 10:21 pm
Location: Perth, W.A.

Post by Jeff in WA »

The Jeep guy who fitted the radiator supposedly has done this, but ...... perhaps we need to get it done by someone else to make sure.

Jeff
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

That Jeep guy wasnt Eddie at 4wd usa was it
Posts: 202
Joined: Wed Oct 27, 2004 12:22 am
Location: perth lesmurdie

Post by JEEP1 »

haha thats what i was thinking.
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

if ya want sum good advice take it to john at choice radiators in bellvue, hes the only guy that i will trust, has got all the good gear and nos what hes doin.
Posts: 7
Joined: Wed Nov 02, 2005 10:21 pm
Location: Perth, W.A.

Post by Jeff in WA »

No it wasn't Jeep USA.
Posts: 1397
Joined: Sat May 29, 2004 6:58 pm
Location: West Australia Posts: Less than DeWsE

Post by jeep97tj »

Is it over heating or is the guage just playing sill buggers??
Shane
Posts: 7
Joined: Wed Nov 02, 2005 10:21 pm
Location: Perth, W.A.

Post by Jeff in WA »

Gauge gets to half ....... but the overflow bottle flips it's lid and water gushes everywhere. We get the full gurgle noise, steam, top radiator hose sucks in ......... then we sit and have a cuppa.

Jeff
Posts: 1397
Joined: Sat May 29, 2004 6:58 pm
Location: West Australia Posts: Less than DeWsE

Post by jeep97tj »

Sounds like the cap is falty

The radiator cap hold a certian pressure in the cooling system (its writen on the cap) the higher this pressure the higher the boiling point of the water.

May be u are boiling over at 100c instead of 120c, so may be its not really over heating its just boiling over.

But its not your problem to sort out take it back for them to fix.
Shane
Posts: 7
Joined: Wed Nov 02, 2005 10:21 pm
Location: Perth, W.A.

Post by Jeff in WA »

Radiator caps - we have bought two different ones and it still overheats. We took it back to the garage who fitted the new radiator - they want $240 to reflush the block!! I'm thinking we should just get rid of it!! We had to buy another 4WD to go bush in.

Jeff
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Flush the block yourself just drop both hoses and take the thermostat housing of take the thermostat out and hose it out its only 2 bolts for the thermostat housing just get a new gasket lots cheaper than what there quoting to flush the block man thats a rip off
Posts: 58
Joined: Sun Apr 06, 2003 10:48 pm
Location: Anchorage,Ak

Post by ODD BALL »

Take your time & make sure you purge all the air out of the head. You must have a air pocket & trust me have had the sme prob your having now when I did my motor swap. Darn thing would boil up FAST! Get the air out & have it back on the road.
You do not have the required permissions to view the files attached to this post.
It's easy to play, but hard to learn!
Posts: 110
Joined: Tue May 17, 2005 9:23 pm
Location: ___

Post by stumpyGU »

hey whats wrong with 4wd usa if u dont mind me asking?
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Post by Wooders »

Check the water pump is ok.
Check the belt is correctly routed (not kidding).
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 322
Joined: Fri May 21, 2004 12:10 am

Post by Steve F »

Yep definatley check that belt, it goes all over the place (did mine today) and one mistake and you'll have the water pump spinning backwards and doing nothing at all, it would certainly cause it to verheat big time.

Cheers
Steve
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests