Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

bent stering arm????

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 111
Joined: Tue Jan 11, 2005 6:50 pm
Location: canberra

bent stering arm????

Post by kegz »

hey ive noticed on my old ln65 lux that the shaft that goes from the pitman arm on the steering box to the steering arm or whatever you want to call i hits the u bolts on the prings (LEAF ALL ROUND) would this indicate the arm thats attached to the hub is bent? i have checked al lthings like the diff is lined up properly and the shackels are standard and help would be appreciated cheers
Top
Posts: 3556
Joined: Mon Dec 13, 2004 7:58 am
Location: Western Sydney

Post by Busiboy »

Does it have a 2" lift?

Back in the day when I had a lux I had something similar when I put a 2" lift into my YN65(?) lux
Something witty said by someone famous
Top
Posts: 111
Joined: Tue Jan 11, 2005 6:50 pm
Location: canberra

re

Post by kegz »

NOT TO SURE ON THE LIFT ITS GOT A LIFT KIT I THINK NOT BODY LIFT THOUGH IS THERE ANYWAY I CAN FIX THIS PROBLEM
Top
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Contact:
Contact Gribble

Re: re

Post by Gribble »

Make sure the "u"bolts are the right way around.

But yes it does sond like the j-arm is bent, especially if you have no lift.
\m/
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests