Just did my tappets and set them at 15 thou.
Is there another safe setting I can set them at which is a little bit tighter.
My engine runs on LPG 99% of the time. Day to day running, no heavy stuff.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TB42 valve clearance
Moderators: toaddog, TWISTY, V8Patrol, Moderators
A speed camera would have prevented that!
TB42 valve clearance
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
A speed camera would have prevented that!
Also the manual states to do them whilst the engine is hot.
My friend allways does them when they are cold. If the latter then that would give a tighter overall setting when engine has reached operating temperature. Any problems long term with this
My friend allways does them when they are cold. If the latter then that would give a tighter overall setting when engine has reached operating temperature. Any problems long term with this
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Who is online
Users browsing this forum: No registered users and 2 guests