Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body lift on a fj45

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 27
Joined: Sat Oct 29, 2005 2:22 pm
Location: Brissy

Body lift on a fj45

Post by Funk_off »

Hi Peoples, Am looking to finally put my lift blocks that have been sitting in the garage into my truck. I have all the blocks and bolts. Just wondering if anyone has lifted a fj45 and can give me any info on what i will need to adjust to get the lift in?
Top
Posts: 438
Joined: Thu Jun 24, 2004 4:58 pm
Location: wollongong

Post by Stackson45 »

Hey dude - try searching for it first.

You'll have to mod things like steering column shaft, if only 2" your wiring annd lines should be alright, can't remember if i had to stretch brake lines or anything.

You should find what you're after.
Landcruiser UTE 1996 FZJ75 - SPOA, 35"s,
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
Top
Posts: 45
Joined: Fri Nov 04, 2005 9:08 pm
Contact:
Contact andrewfarmer

Post by andrewfarmer »

I had to extend the wiring to the temp sender and oil pressure sender
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

you have to lift the steering box 1.5 inches. and the colum in the cab 1 inch. brake lines and wiring was fine.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests