Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wheel Bearings

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Forum rules
Post Reply
Posts: 111
Joined: Mon Jan 17, 2005 1:54 pm
Location: Gold Coast - Australia

Wheel Bearings

Post by Gobbles »

Something keeps shattering my front Right Wheel Bearing..When I replace the bearing all is good until I'm offroad and lock in the hubs...I get a grinding noise at the front still and then if I push too hard for too long..eventually after 3 - 4 trips out somewhere doing this the wheel bearing will go again. I've taken it to the mechanic to get him to look at it and he says there is nothing wrong and have spent over $1600 trying to get it fixed again and again. I just want it fixed..Any Suggestions?

Cheers,
Kurt.
'92 MU - 2.8 TD - Stock as a rock - Panel Damage Chariot
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

these r ifs in the front yeah? u probably have got a bent cv or stub, but if it was ur stub you would notice it, pull it out ur self take it to a machine shop or sumone with a lathe and check the axle for run out, other than that i dont no.
Top
Post Reply

Return to “Dmax / Isuzu / Holden / Great Wall”

Who is online

Users browsing this forum: No registered users and 0 guests