OK what am i doing wrong,
who did i kill in a past life
why am i being punished
I took my gear and transpher sticks out to check the breather found there is not one there, when i put it back together the transpher stick is stuck.
I have pulled it out to check i am putting it in the right way around, which it is but no movement.
HELP PLEASE
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
AAAAAAAAAAAAAAAAAAAAAAAAA F&^K
Moderator: -Scott-
AAAAAAAAAAAAAAAAAAAAAAAAA F&^K
Cut down Sierra cab on extended LWB chasie running, Hilux front and Bundy back, with a 4AGZE should be finished about umm soon. A 60 Series work truck and some go fast toys too.
Story of my life - but I'm guessing you've missed the slot.
Did you dismantle the trasfer lever assembly or has the metal shim that guides the lever into position turned.
By memory there are two slots visible one on each of the selector shafts - make sure you are inserting into the correct slot. This can be a pig of a job sometimes taking 30 seconds other times a LOT longer (this is getting worse by the minute).
or
postition the two slots together then insert the lever.
I'm going for a lie down now.
Did you dismantle the trasfer lever assembly or has the metal shim that guides the lever into position turned.
By memory there are two slots visible one on each of the selector shafts - make sure you are inserting into the correct slot. This can be a pig of a job sometimes taking 30 seconds other times a LOT longer (this is getting worse by the minute).
or
postition the two slots together then insert the lever.
I'm going for a lie down now.
When I read about the evils of drinking, I gave up reading
We can all smile now
I got a quote of $900 to pull the box strip it and install.
Decided i could not loose anything and got in there with the BF Screwdriver and in less then 2 min click all fixed
Thank you Frank good advice again
Went to the Logan Extream night run on Saterday, did the entire run during the day even got a hill named after me you should try Pajero hill good fun. Glad to be wheeling again
I got a quote of $900 to pull the box strip it and install.
Decided i could not loose anything and got in there with the BF Screwdriver and in less then 2 min click all fixed
Thank you Frank good advice again
Went to the Logan Extream night run on Saterday, did the entire run during the day even got a hill named after me you should try Pajero hill good fun. Glad to be wheeling again
Cut down Sierra cab on extended LWB chasie running, Hilux front and Bundy back, with a 4AGZE should be finished about umm soon. A 60 Series work truck and some go fast toys too.
Who is online
Users browsing this forum: No registered users and 0 guests