Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Pics of my Rangie Tray
Moderator: Micka
Pics of my Rangie Tray
Thanks to AnthonyP for posting these for me
Last edited by cloughy on Thu Nov 10, 2005 12:20 pm, edited 1 time in total.
Wanted: Car trailer or beaver tail truck, let me know what you got
Im interested in doning a ute conversion just like yours, did u do it yourself? is it possible for me to have a little look at it if so could u send me a PM, just wondering if that roof on it is still the original just cut and rewelded ? or is it off somthing else?
82 RR with 37" Swampers, toy centres and 4inch suspension lift / 2inch blocks
Are you sure it's a C6 as they are the larger auto ran behind ford big blocks if so i'd be keen otherwise it would be either C4 C9 or C10 which are all basically the same transmission.But yes i have 2 Lt95 machined to suit C4 9 10. The roof is just cut and shut.
Wanted: Car trailer or beaver tail truck, let me know what you got
rangie tray back
Nice work cloughy... It dosent look as difficult as i first thought. Could you post some more pics close ups of joins would be great.. what type rear window are you going to use? Is it 1.6mm plate and 25mmSHS for the braces.
nice lookin machine! i am almost at the same stage on my ute conversion. i was goona buy an ol tray off a cruiser and cut it to fit. can you weld a tray to the chassis like that? will it pass engineering? haha go the ford engines. i just dropped a nicely work 302 windsor with a c4 auto into mine. i used the original rear window from my rangie so i can have the thing open up still. what window are you going to use for yours? and how will yuou mount it?
again verrrrrrrrrryyy nice.
again verrrrrrrrrryyy nice.
The rear window is outlined from an inter truck but will be cut from perspex and yea 1.6mm probably could of used thinner though. The uprights for the tray will be flanged at the top so it can be lifted off. and whats this about engineerwhozewhatsit. Just got to work out how to cap the ends of the quarter panels then its over to my old man to paint
Wanted: Car trailer or beaver tail truck, let me know what you got
Cool tray back.
i'm in the UK and i'm about to do a tray myself.I've got a 4 door RRC with the 3.9V8 4 speed auto.
Bobtails are all the rage here but after searching for some ideas i think the tray back is the one for me.More info please/pictures aswell.
Any links to tray back sites? Keep um coming!
i'm in the UK and i'm about to do a tray myself.I've got a 4 door RRC with the 3.9V8 4 speed auto.
Bobtails are all the rage here but after searching for some ideas i think the tray back is the one for me.More info please/pictures aswell.
Any links to tray back sites? Keep um coming!
Welded the edges then riveted a 150mm strip of the old roof in the inside using sikaflex, then some fibreglass and filler, probably be prone to cracking but should last a whileLoanrangie wrote:Did you weld the roof or rivet and fill ?
Wanted: Car trailer or beaver tail truck, let me know what you got
Rebuilt LT95 and C10, Auto has an extra clutch pack, re-machined planetry gearset, Stage 2 shift and standard stall of about 1800rpm.
Which should suit the motor quite well, being a 351 windsor, between 9.5 and 10:1 comp balanced(yet to machine the block), blueprinted and ported heads with microtech injection, hopefully should poke along OK
Which should suit the motor quite well, being a 351 windsor, between 9.5 and 10:1 comp balanced(yet to machine the block), blueprinted and ported heads with microtech injection, hopefully should poke along OK
You do not have the required permissions to view the files attached to this post.
Wanted: Car trailer or beaver tail truck, let me know what you got
Who is online
Users browsing this forum: No registered users and 3 guests