Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

custom snorkels

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

custom snorkels

Post by vanbox »

I wanna make a snorkel for my GQ patrol (not that it matters what car). i am tossing up between 3" stainless steel with rubber elbows or 3" steel powdercoated. im just after some pictures of anyone who has done something similar, a rough cost factor and places to buy the elbows from...

thanks
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

do a search in the tech section on it and you will find some good pics as this was a recent thread here not that long ago
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

The thread was called "Stainless Snorkels"... heaps of info
Top
Posts: 248
Joined: Sun Nov 14, 2004 6:40 pm
Location: Melbourne, Victoria.

Post by ditch »

2 pages back, http://www.outerlimits4x4.com/PHP_Modul ... hp?t=52534
Top
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Post by V8 Middy »

I saw a thread not long ago (I thought it was the one above) where a guy at Lilydale midas was recommended to do custom snorkels.

I've searched, read and re-read a whole lot of threads and can't find it anywhere. Can anyone help me out?
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

rubber bends are dearer than s/steel mandrel bends. midway metals :armsup:
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

V8 Middy wrote:I saw a thread not long ago (I thought it was the one above) where a guy at Lilydale midas was recommended to do custom snorkels.

I've searched, read and re-read a whole lot of threads and can't find it anywhere. Can anyone help me out?
Rohan Canavan - Midas Lillydale.

Just go in and ask.

Dave.
Land Rover Discovery - GQ conversion underway
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests