Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Beefing up air con
Moderators: toaddog, TWISTY, V8Patrol, Moderators
no point in swapping from r134a to r22,totally diff gasses,you would only swap r22 with sp34e.or r12 for r134a and if you change the seperator you can go from r12 to sp34e.DirtyPaj wrote:BTW if you replace one gas with another ie swap R134a with R22 you will also need to replace all the oil seals and lines as well. Too much hassle, just make sure everything is clean and you've got the right gas charge in it.
you wont need to change the lines just seals and seperator..
pic's an vids here
http://imageevent.com/evlhilux/mundaringvideo
http://imageevent.com/evlhilux/mundaringvideo
they don't change oil that is in the gas..r134a is a mineral oil based gas...murcod wrote:Mine was converted from R12 to R134a. Parts changed were: oil , O ring seals on the fittings that were disassembled to do the work, reciever drier and expansion valve (only because it was stuffed anyway!)
It's been running fine for the last 18mths like that.
pic's an vids here
http://imageevent.com/evlhilux/mundaringvideo
http://imageevent.com/evlhilux/mundaringvideo
Suzy, if i read what your writing correctly, are you saying the oil is in the gas or what, i may be mixing up what you typed,suzy wrote:they don't change oil that is in the gas..r134a is a mineral oil based gas...murcod wrote:Mine was converted from R12 to R134a. Parts changed were: oil , O ring seals on the fittings that were disassembled to do the work, reciever drier and expansion valve (only because it was stuffed anyway!)
It's been running fine for the last 18mths like that.
but i am in the industry and would like you to clarify this before i go critisising.............
i mean that the oil isn't a seperate thing like in a house old fridge,i havn't done much with cars so i if i'm wrong i don't mind ppl critisising,but don't car air con oil travel in the gas?..to a point..ozy1 wrote:Suzy, if i read what your writing correctly, are you saying the oil is in the gas or what, i may be mixing up what you typed,suzy wrote:they don't change oil that is in the gas..r134a is a mineral oil based gas...murcod wrote:Mine was converted from R12 to R134a. Parts changed were: oil , O ring seals on the fittings that were disassembled to do the work, reciever drier and expansion valve (only because it was stuffed anyway!)
It's been running fine for the last 18mths like that.
but i am in the industry and would like you to clarify this before i go critisising.............
pic's an vids here
http://imageevent.com/evlhilux/mundaringvideo
http://imageevent.com/evlhilux/mundaringvideo
no mater what sort of refrigeration or air conditioning, all oil is a seperate item to the gass, and in all forms there is an amount of oil that travels throughout the refrigeration system, as oil particles get picked up and pumped through with the refrigerant,
automotive AC is hardle any different to house hold AC, the general system is near tyhe same, with a few minor differences,
automotive AC is hardle any different to house hold AC, the general system is near tyhe same, with a few minor differences,
Refrigerant is a very efficient degreasing agent (it used to be used in the dry cleaning industry), therefore the gas will strip the oil from the compressor and carry the oil round the system. Although the two are technically separate you will find oil in all parts of the system.
Correction to earlier post, it's only the rubber lines that should be replaced (along with the seals) due to the fact that they can absorb oil and cause problems with the new set up. The solid lines will be fine. Anyway at the end of the day it's very unlikely that you will get any noticable difference in capacities.
Correction to earlier post, it's only the rubber lines that should be replaced (along with the seals) due to the fact that they can absorb oil and cause problems with the new set up. The solid lines will be fine. Anyway at the end of the day it's very unlikely that you will get any noticable difference in capacities.
99NL Paj
OK, it is a DX 4.2 Patrol.
I think that it does have a thermostat. It's under the dash in the passenger foot well.
I'm thinking that it could be due to this, or the compressor having a dodgy power connection which periodically works/ then doesn't.
Any ideas?
I think that it does have a thermostat. It's under the dash in the passenger foot well.
I'm thinking that it could be due to this, or the compressor having a dodgy power connection which periodically works/ then doesn't.
Any ideas?
Droughtmaster Offroad Trailers and Campers
Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Who is online
Users browsing this forum: No registered users and 1 guest