Hey.
My Mav(GQ) have just started to leak from the input shaft on the steering box. Hense Power Steer fluid coming out like a Champ...
Has any one had this problem?
Can i just replace a seal? or is it time for second hand or Reco box?
Any one got a spare P/steer box? ( if needs replacing)...
Cheers
Stewie
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Leaking input shaft on P/steer box GQ
I dont think there is a seal right where the input shaft goes into the steering box. The part that the input shaft attaches to is called the 'worm and valve' assembly according to the manual. There are large teflon o-rings inside the valve assembly attached to the piston. If these orings leak, then oil would leak past the piston and out through the input shaft. If your confident, then you can remove the piston and replace the teflon seals......
Nick
Nick
Who is online
Users browsing this forum: No registered users and 4 guests