Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Electric diff locks for 80 Series std housings

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

Electric diff locks for 80 Series std housings

Post by Red Rover »

Will they fit into a std housing or do i have to use the ones the lockers came with?
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

They will fit into standard housings. Although the side with the locking cog is a bit tight, the assembly can be maneouvered into place. To make it even easier, remove the longer studs and replace them after the diff centre is in place.

You will need the shorter side axle from a locking diff though.

Dave
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests