Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

BUNDY HEIGHT

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 18
Joined: Sat May 14, 2005 9:58 pm
Location: SYDNEY

BUNDY HEIGHT

Post by MAMUTT »

Ive got and 85 bundy and want to do a suspension lift on it, but im worried about getting it in and out of the garage. does anyone know what the standard height of a bundy is and on what tyers??
Top
Posts: 85
Joined: Wed Apr 13, 2005 11:49 pm
Location: Townsville

Post by V6 Bundy »

I don't know the actual height, but when mine was still together, it has the 80series coils and it didn't fit under the roller door
Top
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Contact:
Contact evanstaniland

Post by evanstaniland »

lay a peice of timber on the roof of your car then use a measuring tape to see how high it is then add how much lift it is then compare it to the height if your garage that is the easiest way that means the measurement are from your car not anyone elses

evan
Top
Posts: 18
Joined: Sat May 14, 2005 9:58 pm
Location: SYDNEY

Post by MAMUTT »

thanks evan
ive actually tried that method, but im guessing that over tha past 20 years there must be some sag in the suspension, which may not be calculated, and i dont want to find out the hard way.
Top
Posts: 18
Joined: Sat May 14, 2005 9:58 pm
Location: SYDNEY

Post by MAMUTT »

thanks evan

i actually tried that method, but im guessing that over the past 20 years there must be some sag in the suspension, and i dont want to find out the hard way when it wasnt calculated.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 37 guests