Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

trailing arm ends

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

trailing arm ends

Post by Rhett »

Im chasing somewhere in Aus that you can but the ends they weld in the end of trailing arms with the thread in them. Don't know there proper name. I saw them on a website somwhere but I forget where :cry:
Its a wheelbase thing
Top
Posts: 342
Joined: Sun Sep 19, 2004 3:49 pm
Location: gippsland vic

Post by ratboy »

is it rose joints
ok it was me
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

if ya after rose joints cbc sell them,
buggy time............
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Re: trailing arm ends

Post by POS »

Rhett wrote:Im chasing somewhere in Aus that you can but the ends they weld in the end of trailing arms with the thread in them. Don't know there proper name. I saw them on a website somwhere but I forget where :cry:
No he is after the WELD in bungs that you screw the Heims/Rose joints into!

You can get them from ABT in sydney, or you could just weld a nut into the end of the link. :D
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests