Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Will an MQ ARB winchbar fit a GQ?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 522
Joined: Tue Aug 31, 2004 2:35 am
Location: Sydney

Will an MQ ARB winchbar fit a GQ?

Post by mabsydney »

Just that, thanks.
1989 Nissan Safari TD42 with stuff
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

ummmm...........without a few mods no, i seem to remember some one sayin that the chassis rail width is different by 10mm, im not sure which is wider thou, also you would have to check bolt hole ocations and drill them as necessary
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Nope







easy answer :finger:








the chassis's are differant in width, but like everything it will depend on how well you can weld and how determined you are to make it fit.
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

MQ chassis is marginally wider.... i measured in on my MQ and my GQ a while back... its only about 10 mm....

its a simple matter of just getting your MQ bar and spacing it 10mm on the brackets, re drilling the holes and some slightly longer bolts and you should be right.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 522
Joined: Tue Aug 31, 2004 2:35 am
Location: Sydney

Post by mabsydney »

Thanks for the replies :)
1989 Nissan Safari TD42 with stuff
Top
Posts: 146
Joined: Thu Oct 16, 2003 7:15 pm
Location: Hunter Valley

Post by muddyperils »

Also apart from the different chassis width the actual mq bar from flat section to the top of the tubes is about two inches higher so you will have the middle tube braces right in the middle of your headlights???
GQ TOURER
Thankful to be able to use the tracks that are left....SHEET where are they........
Top
Posts: 1032
Joined: Mon Mar 17, 2003 10:14 am
Location: Newcastle, NSW

Contact:
Contact Heathx4

Post by Heathx4 »

Used to be a very useful thread on this (back when I asked the same thing), but unfortunately the pictures have gone AWOL. Still might be useful...

http://www.outerlimits4x4.com/PHP_Modul ... php?t=6569
* Nothing is foolproof to a sufficiently talented fool *
Top
Posts: 2480
Joined: Tue Mar 09, 2004 6:42 pm
Location: NSW

Post by r0ck_m0nkey »

muddyperils wrote:Also apart from the different chassis width the actual mq bar from flat section to the top of the tubes is about two inches higher so you will have the middle tube braces right in the middle of your headlights???
Probably not. This is a pic of my MQ with a GQ bar on the front, the opposite way around to whats being asked here, but none the less the middle bar is sitting just below the headlights, so an MQ bar shouldn't be to much different.

The mounts would have to be changed anyway, so could raise or lower the bar to suit any negligable differences in headlight heights
You do not have the required permissions to view the files attached to this post.
If God did not intend for us to eat animals, then why did he make them out of meat?
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 4 guests