Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bundera heating up
Moderators: toaddog, Elmo, DUDELUX
Bundera heating up
Hi all,
I just bought a '86 Bundera turbo diesel (2.4 4 cylinder). Took it out wheeling on the w/e and goin up a big hill in 2nd low range it heated up right up to the red on the heat gauge. It was revving at 4g all the way up. Is this simply because of the lack of air flow and hi revs? It also heats up on the freeway to about half way. Any advice? I searched and couldnt really find any.
- Andy
I just bought a '86 Bundera turbo diesel (2.4 4 cylinder). Took it out wheeling on the w/e and goin up a big hill in 2nd low range it heated up right up to the red on the heat gauge. It was revving at 4g all the way up. Is this simply because of the lack of air flow and hi revs? It also heats up on the freeway to about half way. Any advice? I searched and couldnt really find any.
- Andy
I had a similar problem with my 80, turns out all I had to do was top up the fluid in the viscus fan hub.
I don't know if you run a viscus fan clutch but if you do it is a easy thing to do your self.
Someone posted a step by step manual on how to do it, (I think is was dumbdunce), and I just followed that. Thanks again to whoever did post that.
I don't know if you run a viscus fan clutch but if you do it is a easy thing to do your self.
Someone posted a step by step manual on how to do it, (I think is was dumbdunce), and I just followed that. Thanks again to whoever did post that.
My Cruiser is Environmentally Friendly.
It runs on recycled Dinosaurs.
It runs on recycled Dinosaurs.
This happened to us after a rough run and a snatch recovery involving mud, bottomed out diff, front end in the muck.
Small hairline crack meant that the radiator didn't circulate well when stationary. On the move, the needle went down.
Radiator patch fixed it.
THEN... couple months later, while idling at the lights, WOOOMPH, redline. Pressure test revealed mega problems. Opened her up, crack in the head above each cylinder. $2300 later, new head, all good.
Small hairline crack meant that the radiator didn't circulate well when stationary. On the move, the needle went down.
Radiator patch fixed it.
THEN... couple months later, while idling at the lights, WOOOMPH, redline. Pressure test revealed mega problems. Opened her up, crack in the head above each cylinder. $2300 later, new head, all good.
1989 Landcruiser SX5 aka Bundy Jap Import
Completely standard... oops, I got Rancho adjustables
Completely standard... oops, I got Rancho adjustables
Who is online
Users browsing this forum: No registered users and 143 guests