Looking closely at my Disco chassis it looks a bit surface rusted and scratched... considering re-printing it with anti corrosion marine paint
Anyone done this job before??
Do Rover Chassis end up rusting badly if not recoated
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Chassis Paint ( need some help)
Moderator: Micka
Chassis Paint ( need some help)
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
83 Rangie 2" OME Still Stock
Well, when I was in Saudi , my chassis was always clean from sandblasting. Had to repaint the grill and replace the headlights too.
It will not rust unless you go on beaches, and then it is the floor, sills, rear crossmember etc.
But if you still want to paint it, use POR15 or similar coating which seals the surface. White Knight is an Australian much cheaper brand. google POR15.
regard sPhilip A
It will not rust unless you go on beaches, and then it is the floor, sills, rear crossmember etc.
But if you still want to paint it, use POR15 or similar coating which seals the surface. White Knight is an Australian much cheaper brand. google POR15.
regard sPhilip A
The chassis tend to rot from the inside more.
Best bet on the inside is Waxoil or similar.
Painting the outside looks nice but is less critical other than in the obvious mud traps.
I did have a thought about this though. What about using the anti-vandal paint that spray paint will not stick to? I wonder if it would help prevent mud sticking to it and give you somethig close to a self cleaning chassis?
Si
Best bet on the inside is Waxoil or similar.
Painting the outside looks nice but is less critical other than in the obvious mud traps.
I did have a thought about this though. What about using the anti-vandal paint that spray paint will not stick to? I wonder if it would help prevent mud sticking to it and give you somethig close to a self cleaning chassis?
Si
Who is online
Users browsing this forum: No registered users and 0 guests