Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Replace ? Repair Hydraulic pump.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Replace ? Repair Hydraulic pump.

Post by ludacris »

I have a Enerpac pipe bender and the Hydraulic pump is not workin efficiently as it should be. Is it cheaper to replace the pump or get the Enerpac pump rebuilt. Its the piece on top of the bender.

LudaCris
You do not have the required permissions to view the files attached to this post.
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 247
Joined: Sat Oct 26, 2002 7:48 am
Location: Brisbane

Post by zooki »

about $660 for a new pump, IMHO you pay extra for enerpac and similar so you can rebuild it later

applied Hydraulics at Virginia 07 3865 6811 will be able to rebuild it
www.auszookers.com
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Thanks champ.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Take it apart and go to a seal transmission shop and get new seals.
Normaly only the seals go.
unless the shaft has a score mark on it .
Dave
Top
Posts: 342
Joined: Sun Sep 19, 2004 3:49 pm
Location: gippsland vic

Post by ratboy »

replace the seal very easy and cheap
take old seals to hyduralic joint get new ones and put back together
see easy
ok it was me
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests