My GF cousin bought a Range Rover bout 2 months and since then the center console had start to move around a bit but just after coming back from a trip to Adelaide, all the center console area has become shocking. It all moves about heaps and is worried it'll fall apart.
Is this a common problem with rangies and how do you suggest he could fix it?
Think it's a 88 model cause it's got the 3.5L V8.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bad Rangie Interior
Moderator: Micka
Bad Rangie Interior
The machine is now alive...
Yes, this is normal. I haven't seen onwe with a console that isn't broken. LR's idea of plastic is a joke 
Best and cheapest option is build you own, should cost less than $100 including covering. You could also laquer it to match the door trims as well if it has them
Regards,
Trav
Best and cheapest option is build you own, should cost less than $100 including covering. You could also laquer it to match the door trims as well if it has them
Regards,
Trav
Land Rover- The Collingwood of 4WD's!!!!
You haven't seen either of mine thenAquarangie wrote:Yes, this is normal. I haven't seen onwe with a console that isn't broken. LR's idea of plastic is a joke
Best and cheapest option is build you own, should cost less than $100 including covering. You could also laquer it to match the door trims as well if it has them
Regards,
Trav
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Hey, you wouldn't be able to make one for my Rangie. I have an 89 model.Yep, I just made my own out of ply then covered it in "leather look" vinyl, including a padded lid.
Shane[/quote]
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Yes thats what happens when you use an ABS plastic that isn't UV stablised.Aquarangie wrote:LR's idea of plastic is a joke
Last edited by RobG65 on Sun Dec 04, 2005 11:08 am, edited 1 time in total.
"All the parts falling off this truck are of the very finest British manufacture"
earlier consoles aren't bad - the one in mine is fine, because the box is made from wood or something else solid.... when they went injected, and changed to the short lever LT77, the consoles went to the flimsy plastic box ones....
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Yes Agree long live the Old Rangies....RangingRover wrote:earlier consoles aren't bad - the one in mine is fine, because the box is made from wood or something else solid.... when they went injected, and changed to the short lever LT77, the consoles went to the flimsy plastic box ones....
Mine is 1983 still solid console what moves is the plastic body of the kilometer gauge indicator and so on
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
83 Rangie 2" OME Still Stock
Who is online
Users browsing this forum: No registered users and 14 guests