Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

manual aisin hubs

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

manual aisin hubs

Post by corkhead »

all of a sudden my hubs dont disengage - i have the exploded diagram and have since cleaned (numerous times) and put back on.

what happens is when i put back to free and the hub lights (dash dont go out - plus you can feel it in the steering wheel) i come back to the garage and take the freewheel hub part off and the clutch is still on the axel spline - it doesnt slide back out ??

are there any tricks or pointers i need to do to make sure when you turn to the free position it pulls the clutch off the spline !?!

thanks guys ......
www.victoriancampertrailers.com.au
www.salon13.com.au
Top
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

Post by corkhead »

found this good link - had a more detailed explanation on the clutch and tension spring - think i stuffed this part up .. will give it a go.

now heres the link for others !

http://www.off-road.com/toyota/tech/aisin/

http://www.pirate4x4.com/forum/showthre ... ht=rebuild

love the internet
www.victoriancampertrailers.com.au
www.salon13.com.au
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests