Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Second airs and tubes???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Second airs and tubes???

Post by huntn »

Hi guys, yes i have done a search and no luck, this may be a stupid question, but nobody seems to know it, can i run tubes in my 36 pedes on 15x10 with second airs? i wish to do this to hopefull make them a little bit tuffer while out hunting. Cheers.
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

nope u cant, and why would u want to, the 2nd air is a bead lock, so u wont have any prob with the simex popping a bead etc, so just drop the pressure to 2psi and away ya go
www.overkill4x4.com
ph 94766137
Top
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Post by huntn »

No not to stop popping the bead off, but to make the side walls a bit tuffer, so if i get a tiny cut in the sidewall the tube can stil be good???
Top
Posts: 317
Joined: Fri Nov 18, 2005 9:32 pm

Post by ats4x4dotcom »

why would you want a tube with 2ndair?

tyre goes dead flat straight away, compared to inserting a plug, and pumping it up, tube means strippiing and re fitting the 2ndair every time......
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

I dont know where you would put the valve stem, hang on drill 1/2' hole through the middle of the tread, turn the tube insideout, poke the valve stem through the hole in the tread and there you go Secondairs and tubes.
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests