Hey guys,
Just wondering if anyone could help, my feroza elIII seems to be using a bit of oil at the moment, and I will admit it has done some kms (280+) but when I look in the engine bay or underneath the engine i cant see any real big amounts of oil dripping out.. it seems that I need to top the oil up once a week sometimes it goes from full to just off the bottom of the dipstick.. I asked my mechanic to give it a full service and check for leaks last time it was in but he couldnt find anything..
what would you do?
Cheers
Paul
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
using oil...
Moderator: Tiny
I decided to change the oil over today.. had a good look under there and I noticed what looks like oil leaking from around the bottom of the engine, also on the right hand side of the rocker cover there seems to be a bit of oil seeping through..
When i got the car - I got my mechanic to do a major service: change the clutch, gearbox oil and rear main seal, so where else down the bottom of the engine does it usually leak? oil sump seal? hmm
When i got the car - I got my mechanic to do a major service: change the clutch, gearbox oil and rear main seal, so where else down the bottom of the engine does it usually leak? oil sump seal? hmm
This is where my leak is (still not fixed), leaks down to empty on the marker about once a month since i put some stop leak in it...
I have a new set of "sump seals"... The sump actually doesnt use a gasket, you need to use goo, and 2 small 2" seals for each end...
And you need to take the motor out to get to it :/ hence why i havnt done mine yet...
I have a new set of "sump seals"... The sump actually doesnt use a gasket, you need to use goo, and 2 small 2" seals for each end...
And you need to take the motor out to get to it :/ hence why i havnt done mine yet...
You do not have the required permissions to view the files attached to this post.
Fear the mighty Daihatsu!
Who is online
Users browsing this forum: No registered users and 6 guests