Hi Peoples, I have seen an air compressor that i like i am just asking whether anyone knows if it will be powerful enough to spray paint a car with. GMC Air Compressor, 1800watt, 40litre Air Compressor, dual output, 2.5 horsepower motor, direct drive, tank pressure between 80psi to 115psi, provides 206litres/min, air displacement.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Air compressor for Spray painting
Moderators: toaddog, TWISTY, V8Patrol, Moderators
It will work pretty hard get quite hot and will probably create a lot of moisture in the air storage vessle, I'd suggest you safely plumb in a larger air storage vessle like an old house type lpg cylinder (90l) and a decent filtration for water etc and you should be much better off.
Posting quality not quantity!
Wanted: Stock HiLux Front Leaf Springs
Wanted: Stock HiLux Front Leaf Springs
Thats 7.3CFM, which is the pump displacement..... but tools usually use the Free Air Delivery rating which is a bit above 100L/min.
I have the same compressor and it uses it's air tank up pretty quickly and the motor works hard if used for long periods. IMO I wouldnt use it for a large spraypainting task such as a car. It is only a cheap unit.
You could go and buy a more robust unit with a larger CFM rating.. would do a much better job .... although they are quite expensive.
Any decent tool shop can show you what HP and CFM you need for the desired tasks.
If you go and find the gun you are going to use.. it usually states the required air flow needed to work correctly. A good gun will also set you back a few hundred bucks.
I have the same compressor and it uses it's air tank up pretty quickly and the motor works hard if used for long periods. IMO I wouldnt use it for a large spraypainting task such as a car. It is only a cheap unit.
You could go and buy a more robust unit with a larger CFM rating.. would do a much better job .... although they are quite expensive.
Any decent tool shop can show you what HP and CFM you need for the desired tasks.
If you go and find the gun you are going to use.. it usually states the required air flow needed to work correctly. A good gun will also set you back a few hundred bucks.
Last edited by HotFourOk on Mon Dec 05, 2005 1:33 pm, edited 1 time in total.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
http://www.totaltools.com.au/downloads/TTI_AirTools/TTI_airtool_4_10.pdf
This shows the range of compressors and the FREE AIR DELIVERY figures..
Air compressors are much like Car Stereo equipment... they just state the Peak Power on the box... but RMS is what matters.. You get what u pay for. This is the same with the Pump Displacement figures and the Free Air Delivery figures. The first shows how much the pump can pump..lol.. but the second one is what you actually recieve from the outlet.[/url]
This shows the range of compressors and the FREE AIR DELIVERY figures..
Air compressors are much like Car Stereo equipment... they just state the Peak Power on the box... but RMS is what matters.. You get what u pay for. This is the same with the Pump Displacement figures and the Free Air Delivery figures. The first shows how much the pump can pump..lol.. but the second one is what you actually recieve from the outlet.[/url]
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Who is online
Users browsing this forum: No registered users and 2 guests