6 Point Roll Cage

Post by **MD4x4** » Sun Dec 04, 2005 4:39 pm

Does anybody have an idea on where I can get a 6 point roll cage fitted to my shortie. Who are the best guys to do this kind of job.

MD

Post by **thunder** » Mon Dec 05, 2005 6:26 pm

RDG done my 4 point and my tray..now at ingleburn.
Richard does a lot for race cars.

I took out the interior and put it back in..Be prepared to cut to get it back in.easy though

Post by **Tiny** » Tue Dec 06, 2005 10:24 am

I do them for $1250 supply onlu, they are easy enough to fit, just time consuming and fidely.

the kits I do do need the feet and cross brace welded and the rest bolts, but you will need to trim and drill in position.

you need to pull the dash half out and drill the dash out and remove the vents on the far end of the dash both sides.

the kit comes with all the hardware and mounting plates etc and the bolted sections are 6mm tig welded clamps.

Post by **sicgq** » Wed Dec 07, 2005 7:57 pm

Bonds roll cages at wetherill park did my brothers shortie, excellent job full diagonals, harness bar. You pull the dash out they do the rest, can't remember the price but it was good for what you got.

Post by **thunder** » Thu Dec 08, 2005 4:33 pm

See your engineer 1st.
A mate just asked 1 engineer and he said he wont pass it.

mine is engineered.

Oh and mine is welded including to the A pillar.

Post by **MD4x4** » Sat Dec 10, 2005 11:43 pm

[RDG done my 4 point and my tray..now at ingleburn.
Richard does a lot for race cars.
]

I'm after someone who knows what they are doing to supply and install. Does RDG do all this and can anyone supply me with some contact details.

MD[/quote]

Outer Limits 4x4 Board

6 Point Roll Cage

6 Point Roll Cage

cage

Who is online