By any chance, does anyone of you recognise this Rear Brake Caliper?
The person I bought it from said that it is from an Isuzu Trooper or pick- up, but when I compared it to my fathers on his Trooper, it seemed somewhat different!
I am intending to fit it to my landrover as it allows handbrake operation, and I also need to buy new rubber seels for it before fitting.
Its part no. is J1101
and it's pad no is AK NS507
any help would be appreciated
Keith
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear Brake Caliper
Moderator: Moderators
Rear Brake Caliper
You do not have the required permissions to view the files attached to this post.
Face your fears, Live your Dreams
I would say it did come from a bighorn/trooper/jackaroo it looks like the 91 model with disc brake rear end which is the same as the 2.8 MU's which I have, the later 3.1 MU's and 92 on Jackaroo/trooper/bighorn had a drum in the centre of the disc for the hand brake.
It looks like there are a couple of bits missing on that caliper like the slides....
It looks like there are a couple of bits missing on that caliper like the slides....
Go hard or go home!!!
MU build here
MU build here
Thanks for the info Yarno.
The calipers came complete, even with the brake pads, although it was half dismantled when I took the photos.
I have now bought new seals for the piston and new brake pipes. They left my pocket empty
so expensive!
I also fabricated thick iron flanges to attach the calipers to the rover axles.
Photos will be attached when ready.
The calipers came complete, even with the brake pads, although it was half dismantled when I took the photos.
I have now bought new seals for the piston and new brake pipes. They left my pocket empty
so expensive! I also fabricated thick iron flanges to attach the calipers to the rover axles.
Photos will be attached when ready.
Face your fears, Live your Dreams
Who is online
Users browsing this forum: No registered users and 0 guests