Hi Guys , well finnaly my engine is a complete mess , so i need to check if a 1KZT engine will bolt up straight where previously existed a 3L , ive a 1993 Lux with previous 22R Engine ( before 3L) so im not pretty sure but i should have a G52-5 or a R151...
Someone with previous experiencies and any advice please?
Thanks a lot
Plafo
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine Swap -> 1KZT into a Lux with previous 3L
Moderators: toaddog, Elmo, DUDELUX
Re: Engine Swap -> 1KZT into a Lux with previous 3L
Most likely you have a G52 or W56 gearbox. They both bolt to a 3L bellhousing. If you have the R151F bolted to the 3L - then it's using the turbo 2L-T style bellhousing....Plafo wrote:Hi Guys , well finnaly my engine is a complete mess , so i need to check if a 1KZT engine will bolt up straight where previously existed a 3L , ive a 1993 Lux with previous 22R Engine ( before 3L) so im not pretty sure but i should have a G52-5 or a R151...
Someone with previous experiencies and any advice please?
Thanks a lot
Plafo
If you have a R151F - the 1KZ-T and 1KZ-TE will bolt to it, using the 1KZ's bellhousing. A G52 and/or W56 will most likely not survive behind the 1KZ....
Look at www.marlincrawler.com and you'll find pics that show the differences in the gearboxes. If you don't have a R151F or R150F, grab one attached to the 1KZ....
My 2 cents
I'm a member of P.E.T.A.
People Eating Tasty Animals
People Eating Tasty Animals
Re: Engine Swap -> 1KZT into a Lux with previous 3L
Thanks a lot man , i'll check out directly into the transmission plate to see the model to be sure ,jr9162 wrote:Most likely you have a G52 or W56 gearbox. They both bolt to a 3L bellhousing. If you have the R151F bolted to the 3L - then it's using the turbo 2L-T style bellhousing....Plafo wrote:Hi Guys , well finnaly my engine is a complete mess , so i need to check if a 1KZT engine will bolt up straight where previously existed a 3L , ive a 1993 Lux with previous 22R Engine ( before 3L) so im not pretty sure but i should have a G52-5 or a R151...
Someone with previous experiencies and any advice please?
Thanks a lot
Plafo
If you have a R151F - the 1KZ-T and 1KZ-TE will bolt to it, using the 1KZ's bellhousing. A G52 and/or W56 will most likely not survive behind the 1KZ....
Look at www.marlincrawler.com and you'll find pics that show the differences in the gearboxes. If you don't have a R151F or R150F, grab one attached to the 1KZ....
My 2 cents
Thanks mate,
Plafo
Who is online
Users browsing this forum: No registered users and 2 guests