Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4wd systems suspenion

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 51
Joined: Fri Mar 07, 2003 4:20 pm

4wd systems suspenion

Post by macuserau »

i was looking thru a 4wd monthly mag and seen the 4wd systems add offering upto 3 inches lift for $845 for 80 and 100 series land crusiers.
I was wondering if anyone out there has used it and whether it is any good.

www.4wdsystems.com.au
:?:
Posts: 51
Joined: Fri Mar 07, 2003 4:20 pm

how high

Post by macuserau »

i guess what i really wanted to know is how high is to high ( when does it become a problem) i was going to get a three inch lift and does any one know about 41mm foam gas shock absorbers, how do they compare to say to just gas shockies.
Posts: 45
Joined: Sun Feb 23, 2003 9:08 pm
Location: brisbane

Post by 80series chris »

if it's for an 80 seires then 3 -4 is ok with out doing to much if your lucky you won't even need to fit castor correction bushes some need them mine didn't if you want to go higher you will need to fit drop boxes or some other castor correction plus longer brake lines adjustable panhard rod front and rear etc
80 series 6inch lift f&r air lockers 34 jt'2s homemade endless air f&r bars dwr unit rock slidder bars and lots of other goodies
Post Reply

Who is online

Users browsing this forum: No registered users and 54 guests