Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TD42 Valve clearence

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 172
Joined: Thu Jul 15, 2004 7:34 am
Location: Denmark

Contact:
Contact Hobbz

TD42 Valve clearence

Post by Hobbz »

I have been searching for the valve clearence for the TD42, but the only thing i could find was 0.35mm. Is that inlet and exhaust or ?
GQ 2.8TD. OME. 35 BFG. Fact. Rear Locker on steroids. Air Locker front. Gearmaster Reduction. 6HP Warn 8274.
Top
Posts: 176
Joined: Thu Jul 15, 2004 4:13 pm
Location: Wodonga

Post by GutSquisher Media »

Both see photo
You do not have the required permissions to view the files attached to this post.
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

.035mm for both intake and exhaust. I opologise for the size of the attachment.

cheers

RN
You do not have the required permissions to view the files attached to this post.
Top
Posts: 502
Joined: Thu Dec 01, 2005 12:09 pm
Location: Cairns

Post by fnqcairns »

Great when documents like this get posted up. Just to confirm for sure what is it? .035 or .35mm? Couldn't read that last article.

I would have needed to ask this same question myself before the week was out.

Just a heads up- DONT BUY THIS BOOK! I have the Haynes repair manual 88 through 97 (thats a lie!) it's a complete waste of space doesn't even have the above spec in it that I could find + the suspension is wrong and so is the inner workings of front hub (mq?) It may suit an 88to92 GQ but it is way out everywhere I have needed to verify on my 96 so far. They do leave a lot of stuff out generally also.

cheers
Top
Posts: 176
Joined: Thu Jul 15, 2004 4:13 pm
Location: Wodonga

Post by GutSquisher Media »

.35mm
Top
User avatar
ACH
Posts: 49
Joined: Wed Apr 14, 2004 2:54 pm
Location: WA

Post by ACH »

GutSquisher Media wrote:.35mm
Yep...which is why all TD42's rattle when cold!! :P
Cheers
Andy

[color=red]Pardon????? [/color]

[b]'02 TD42T thing with other things[/b]
Top
Posts: 172
Joined: Thu Jul 15, 2004 7:34 am
Location: Denmark

Contact:
Contact Hobbz

Post by Hobbz »

Great ! Thay´s why i love this board, great tech ;) and a good laugh.
GQ 2.8TD. OME. 35 BFG. Fact. Rear Locker on steroids. Air Locker front. Gearmaster Reduction. 6HP Warn 8274.
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

Now that you have a half aussie prince when is Denmark going to introduce cricket and Aussie Rules football so as to not deny his heritage? :D
Top
Posts: 172
Joined: Thu Jul 15, 2004 7:34 am
Location: Denmark

Contact:
Contact Hobbz

Post by Hobbz »

When you guys get a serious soccer team :finger:
GQ 2.8TD. OME. 35 BFG. Fact. Rear Locker on steroids. Air Locker front. Gearmaster Reduction. 6HP Warn 8274.
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Can these engines be spun by hand or do you need to remove glow plugs to drop the compression?
KRiS
Top
Posts: 176
Joined: Thu Jul 15, 2004 4:13 pm
Location: Wodonga

Post by GutSquisher Media »

You can by hand, but it's easier to lift one rear wheel put it in 3rd gear hand brake off and rotate motor.
Top
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

Are there any marks on the crank pulley etc to prove when #1 and #6 are at TDC? or is there some other way
Top
Posts: 176
Joined: Thu Jul 15, 2004 4:13 pm
Location: Wodonga

Post by GutSquisher Media »

It a pain the mark on the motor is a bitch to see as you can see from the pic it’s hidden below the pump gear cover. The best way to find out if you have Cylinder 1 at TDC is rotate the motor to the mark as shown in PIC Rocker 1-2-4-5-8-and 9 will all be loose, if 3-6-7-10-11 and 12 are all loose then you have Cylinder 6 at TDC.
You do not have the required permissions to view the files attached to this post.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 9 guests