zook transfer rings

Post by **Roctoy** » Mon Nov 28, 2005 8:30 am

project on hold for the moment, trying to generate interest again

Cheers Chris

Post by **nicbeer** » Mon Nov 28, 2005 2:18 pm

Has anybody used theres yet in the stock case setup?

cheers

Post by **hypo** » Mon Nov 28, 2005 3:01 pm

havent fitted mine as yet, but as we spoke about at werock, maybe u should get ROCTOY FAB etched into the back of them....

Post by **Roctoy** » Mon Nov 28, 2005 3:32 pm

hypozook wrote:havent fitted mine as yet, but as we spoke about at werock, maybe u should get ROCTOY FAB etched into the back of them....

i will for the next ones but any shape changes etc?

Post by **hypo** » Mon Nov 28, 2005 3:39 pm

roc70y wrote:
hypozook wrote:havent fitted mine as yet, but as we spoke about at werock, maybe u should get ROCTOY FAB etched into the back of them....
i will for the next ones but any shape changes etc?

i havent fitted mine up yet so i dont know sorry.

Post by **ZOOK60** » Mon Nov 28, 2005 6:18 pm

it should be in by tomorrow hers a link

http://www.outerlimits4x4.com/PHP_Modul ... 017#668017

Post by **nicbeer** » Mon Nov 28, 2005 6:27 pm

Sweet Zook60, not read your complete setup is yours in the factory zook spot?

cheers

Nic

Post by **ZOOK60** » Mon Nov 28, 2005 6:32 pm

Yep its all the fatory arms except the long arm has been braced with 8mm steel . But im thinking of making a hole new long arm that is welded to the ring so it will be all one arm like one of those kung fu arms from the states. With a grinder i dont think it would be very hard too notch the long arm around the ring.

Post by **nicbeer** » Mon Nov 28, 2005 6:39 pm

U thinking of using RHS or similar? and run a plate or run it around the mount end and slot and weld at ring end?

Be excellent to see how it comes out.

cheers

Post by **Roctoy** » Tue Nov 29, 2005 7:07 am

should i get the spacers cut and weld them to the ring, this would jack the price up though.
i was also thinking maybe they could do with a slot cut in them to slide the long arm through then you guys could just weld either side.

Chris

Post by **SiKiD_01** » Thu Dec 01, 2005 12:13 am

1st, ROCTOY, are you still making another run of these rings?

2nd, are they still $35?

3rd, who has fitted one already? pics please, if you can. how have people fitted it? and what problems, if any have they encountered. or have people just made new mounts on the chassis for this?

i'm helping my mate build up his sierra, and he's interested. its basically stock, but might have S3 RH soon. will be SPOA, RUF, 33"s, etc etc.

thanks

Post by **Roctoy** » Thu Dec 01, 2005 5:14 am

SiKiD_01 wrote:1st, ROCTOY, are you still making another run of these rings?

yes

SiKiD_01 wrote: 2nd, are they still $35?

depends on how much i change the original design, if it stays the same they will still be $35, i have to do a run of 20 at a time to maintain this price, if i start doing one off's they will come in around the $50 mark each.

SiKiD_01 wrote: 3rd, who has fitted one already? pics please, if you can. how have people fitted it? and what problems, if any have they encountered. or have people just made new mounts on the chassis for this?

well, there are 20 people on here that bought them last time and it looks like zook60 is the only one to do anything with his so far, so i can't answer that question yet.

Cheers Chris

Post by **DeWsE** » Thu Dec 01, 2005 11:38 am

Com'on Chris we only received ours yesterday

I'm sure will have it fitted soon. Only thing different is that he will be lifting the case and beefing the arms

Post by **ZOOK60** » Thu Dec 01, 2005 4:52 pm

it would be fitted by now but on Monday my welder died and its rained every arvo since with the car on the front lawn it makes it hard to put the tcase in laying in 4" of water

Post by **Barathrum** » Thu Dec 01, 2005 5:08 pm

i have mine. but since i'm lazy and my current arms are doing ok i haven't done anything with it yet. gonna use my spare t-case to mock up a nice set of arms on before i swap it into my zook.

Post by **ZOOK60** » Fri Dec 02, 2005 7:42 pm

this is what im up too. I picked my welder up but its still farked so out came the stick welder again

please exuse the ugly welds but this is what i have come up with if any one wants to check it out be at the bbm ramp day after about 10.30 hopfully it will be all finished

Post by **alien** » Mon Dec 05, 2005 1:50 pm

i got mine yesterday... dam this thing looks HOT! haha

cant wait to get into adapting it to the tcase! its like a paper gasket, only thick and shiny =) very detailed!

Post by **joe_coelho** » Sun Dec 11, 2005 7:15 am

i'm interested in a set. i just exploded my transfer yesterday at the watagans.

Post by **RUFF** » Mon Dec 12, 2005 8:21 pm

Chris do you ever turn your Phone on? I need one of these yesterday!

Post by **Roctoy** » Tue Dec 13, 2005 7:30 am

RUFF wrote:Chris do you ever turn your Phone on? I need one of these yesterday!

it's always on 24/7 u must have the wrong number.
I'm getting another 20 done this week so people who want em
ring me for banking details.

0424 671 940

Chris

Post by **HRZOOK** » Tue Dec 13, 2005 9:22 am

ZOOK60 wrote:this is what im up too. I picked my welder up but its still farked so out came the stick welder again please exuse the ugly welds but this is what i have come up with if any one wants to check it out be at the bbm ramp day after about 10.30 hopfully it will be all finished

I was hoping to do the same as this but maybe with the front kung-fu style done as well

Hey Zook60 can you take a few more pics?

Front on and any other good angle?

Post by **Roctoy** » Tue Dec 13, 2005 2:27 pm

Some of you guys have been wanting these rings, i am cutting out another 20 now, so if you want one please phone, email or pm me to get some direct debt details.

Here are the people who have expressed interest so far:

RBZOOK
KRAWLA
BONE
SiKiD_01
smileysmoke
mmchaplin
TWISTY_TOY94
Liam x 2
RUFF x2
Markil

so if you want one you need to get in quick.

Chris

Post by **alien** » Tue Dec 13, 2005 2:51 pm

its not often you get asked to buy another blokes ring...

this weekend ish i should have some ideas on how mine will be done - will post pics in my buildup thread.

Post by **Roctoy** » Tue Dec 13, 2005 2:54 pm

alien wrote:its not often you get asked to buy another blokes ring...

this weekend ish i should have some ideas on how mine will be done - will post pics in my buildup thread.

buy my ring

Post by **RUFF** » Tue Dec 13, 2005 9:15 pm

HRZOOK wrote:I was hoping to do the same as this but maybe with the front kung-fu style done as well

Hey Zook60 can you take a few more pics?

Front on and any other good angle?

I dont realy know much about this Zook Junk but my ideas on this mount will end up very similare to this. If im correct and that piece bolts on to where the Hand Brake Drum would normaly go?? However this wont bolt on with any standard mounts. I will be totaly re-mounting it.

For those interested im buying this Ring as i currently have Shorty40s Aztec in getting some work done at the moment. The Gorilla doesnt fit inside it too well

So i cut the entire top of the cage off the other day

Post by **Shorty40** » Tue Dec 13, 2005 9:43 pm

RUFF wrote:For those interested im buying this Ring as i currently have Shorty40s Aztec in getting some work done at the moment. The Gorilla doesnt fit inside it too well So i cut the entire top of the cage off the other day

Suuuuuure Tony......admit it, you have seen the light and you are switching to Zook power

Post by **Roctoy** » Wed Dec 14, 2005 6:18 am

GUYS THIS WILL BE THE LAST RUN OF THESE AT THIS LOW PRICE.
Due to business overheads, materials and labour costs, the price will go up in the new year,

they will still be a good cheap option for ensuring the life of your geared transfer but they wont be $35 anymore probably around $60 - $70.
The design will be changed slightly too with a couple of options, (welded on spacers etc) but this current batch will remain the same as the first lot.

Cheers Chris

Post by **sierrajim** » Wed Dec 14, 2005 7:42 am

Hey Chris,

Put me down for 2 instead of one, $$ transfer today.

James

Post by **Roctoy** » Wed Dec 14, 2005 11:23 am

ok paid people so far are

KRAWLA
BONE
Damo
Markil
Diddyzook
Nicbeer
Twisty_Toy94

Post by **nicbeer** » Wed Dec 14, 2005 12:47 pm

I've paid...

Will PM address.

nic

Outer Limits 4x4 Board

zook transfer rings

zook transfer rings

czxczx

Re: czxczx

Who is online