My A/C (condensor) fan has just sh*t itself. This is a pretty common thing to go and was wondering if any of you guys have had to replace yours and which way you went about it? It is pretty hard to pick one up 2nd hand and was thinking of having it rebuilt by an Auto Elec. Does anyone know of an aftermarkt replacement motor or anything along those lines?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Air Con Fan
Moderator: -Scott-
Air Con Fan
Last edited by hudson44 on Sun Dec 11, 2005 10:12 pm, edited 1 time in total.
I replaced mine a couple of weeks ago with one I found at a wreckers as the one in the car would blow the fuse for the Air Con every time it was turned on.
Took the opportunity to upgrade to a bigger fan and wired it to a seperate switch so that it can be turned on independantly to the air con for a bit more air movement when doing slow off road work.
Took the opportunity to upgrade to a bigger fan and wired it to a seperate switch so that it can be turned on independantly to the air con for a bit more air movement when doing slow off road work.
You do not have the required permissions to view the files attached to this post.
When I read about the evils of drinking, I gave up reading
I haven't looked at my genII air con fan much. I know it has a bunch of saftey mesh all over the whole area to keep retarded individuals from sticking there fingers into the blade. I guess if you hacked all of that away you could get a bigger fan in there on a genII.
DougH
95SR: locked front and rear, more coming soon.
95SR: locked front and rear, more coming soon.
A Davies Craig DC10 is about the same size as the Paj A/C fan.
Their about $100 from Supacheap.
I removed my A/C system (including condenser) and attached two thick aluminium strips spanning the front of the radiator (mounted to the bodywork) and positioned the existing A/C fan on the drivers side and a DC10 on the passenger side. They are both wired to a dash switch to provide extra air flow on hot days (slow hillclimbs etc). This works really well.
A DC10 will fit ok but you will have to remove the condensor and push the bolts through at different points to suit the DC10 fan (bolt pattern isn't the same as the Paj fan).
I tried the wreckers for 2nd hand fans and the prices were beyond belief (if you can find one).
Their about $100 from Supacheap.
I removed my A/C system (including condenser) and attached two thick aluminium strips spanning the front of the radiator (mounted to the bodywork) and positioned the existing A/C fan on the drivers side and a DC10 on the passenger side. They are both wired to a dash switch to provide extra air flow on hot days (slow hillclimbs etc). This works really well.
A DC10 will fit ok but you will have to remove the condensor and push the bolts through at different points to suit the DC10 fan (bolt pattern isn't the same as the Paj fan).
I tried the wreckers for 2nd hand fans and the prices were beyond belief (if you can find one).
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 1 guest