Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series wheel allignment

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

80 series wheel allignment

Post by bruiser »

How is this adjusted

By adjusting tie rod ends?
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Re: 80 series wheel allignment

Post by dumbdunce »

bruiser wrote:How is this adjusted

By adjusting tie rod ends?
turn the tie rod, leave the ends where they are - one end has a left thread, the other is a right thread, so turning the tie rod one way will lengthen it, the other way will shorten it.
Free air locker to the first 20 callers!
Top
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

thanks dunce.
also what part do the calmps play.
Top
Posts: 134
Joined: Thu Sep 15, 2005 9:35 pm
Location: logan qld

Post by rampagingturtle »

the clamps lock the rod onto the ends .just loosen them a little before you turn the rod
wish ihad another 80 for spares
now have a new toy.4"lifted n locked t/d 105 series. ya f*#@ken hoo
Top
Posts: 62
Joined: Wed Dec 22, 2004 8:42 pm

seized tie rods

Post by CHILLI 2 »

BEWARE if your adjusting l/cruiser tie rods if they appear to be very tight they are very easy to pop out of the Joint so be carefull l've popped 3 or 4 trying to wheel align them!!!! Chilli
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest