Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

swaping tail shaft around...

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

swaping tail shaft around...

Post by Mousie »

hey any 1 done a 6" lift and swaped there tail shaft around so that the skinny end is into the gear box? is this required so your tailshaft dosnt hit the chassis suport

cheers
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Yep, you need to do it unless you want to notch your crossmember heavily.
Built, not bought.
Top
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

ok so you unbolt the 4 bolts at the diff and the 4 at the drum and flip it over correct?
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Yep, the driveshaft should not separate due to the design of the dust seal on the spline, but be careful anyway (might be an aftermarket spline) that the shaft does not come apart at the spline.
Built, not bought.
Top
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

Mabe pump some grease in the uni`s while your at it
GQ with big nuts
Top
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

what happends if the spline dose seperate?
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

just mark where it joins with something like liquid paper so if it does come apart you can reasemble it without having to get it rebalanced

Cheers
Top
Posts: 40
Joined: Sun Aug 22, 2004 8:43 pm
Location: Perth

Post by MNBS 4x4 »

make sure you chock the wheels first as you will loose your hand brake when the tail shaft drops
Top
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

ahh thanks pongo i thaught that would be the go

cheers
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests