Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

any 1 know measurements of tie rod arm and drag link with 6&

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

any 1 know measurements of tie rod arm and drag link with 6&

Post by Mousie »

hey just wondering if any1 knows what measurements u neeed to have the tie rod arm with the 3rds 6" roc kit
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Top
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

Do you mean the one behind the diff or infront of diff :?: :?:
As the one one behind the diff shoud not need to be changed
GQ with big nuts
Top
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

My bodgy at home set up was done with A complete 1 lap test around the block a year ago and no pull to the left or abnormal tyre were to date .

Steering draglink infront of diff 1130mm from pin to pin


Tie rod behind diff 1280mm pin to pin
GQ with big nuts
Top
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

ahh ok thanks allot i`ll measure up :P
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests