Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

parts for chev 6.2

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 60
Joined: Sun Jan 30, 2005 6:19 pm
Location: Canberra

parts for chev 6.2

Post by 6.2troopy »

anyone know of a place locally (ACT) where i can get parts for a gm 6.2 deisel. need belts etc, and all the local parts stores (supercheap, autobarn etc) cant seem to help me.
Top
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

Dewars just out of Albury/ Wodonga, they should be able to help. He imports and builds them
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Re: parts for chev 6.2

Post by Nev62 »

6.2troopy wrote:anyone know of a place locally (ACT) where i can get parts for a gm 6.2 deisel. need belts etc, and all the local parts stores (supercheap, autobarn etc) cant seem to help me.
Along the same lines but for Sydney, after a top end for a gm 6.2 deisel (have the bottom end)
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 810
Joined: Thu Jul 15, 2004 8:02 am
Location: Somewhere in NSW

Post by brighty »

If you want a sydney store... try Eagle Auto Spares.... 9771 5599, from memory i think they're in Revesby, but not positive.

Or try Brunswick Diesels in WA. I just had an injector pump overnighted to me last week and they couldn't be more helpful. I was more than pleased with their sevice. Ph 08 9726 1431 or www.brunswickdiesels.com.au
When in doubt..... UTE-ERIZE it!!!
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Re: parts for chev 6.2

Post by mkpatrol »

6.2troopy wrote:anyone know of a place locally (ACT) where i can get parts for a gm 6.2 deisel. need belts etc, and all the local parts stores (supercheap, autobarn etc) cant seem to help me.

What do you mean by Ect?

If you take a complete belt to Repco or Autopro they will be able to measure the belt for you to match up. Also if the belt isnt too bad there will still be the numbers on the back.

Supercrap & Autobarn are no good for sourcing hard to get parts, just seat covers & neon lights (Fully Sick).
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

Post by 460cixy »

cbc on fyshwike or tractor replacements in fyshwike or go see repco
range rover & series one landy!
Top
Posts: 27
Joined: Fri Aug 12, 2005 7:36 pm

Post by sarg »

Try Suburban Imports in Brookvale/Dee Why. Import & supply heaps of Chev gear, & as good a price that you'll get
Top
Posts: 90
Joined: Sun Jan 25, 2004 9:37 am

Post by ozhumvee »

Was going to say that a decent parts place will be able to match the belts by measuring the ones you have or reading the numbers off them.
I've got the numbers for the ones for the 6.2 in my humvee but I'd reckon they would be different to what you want.
what else do you need ?
Linquip in QLD is another source of bits. bit hard this time of year though.
Peter
Dungog NSW
M1026 Humvee , Oka Camper
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 148 guests