Well my Sierra has reached 200,000km and i am going to do all the fluids for the engine, gearbox, transfer and diffs as well as a full coolant flush and fresh brake fluid..
What i would like to know is should i do the disk brakes (i have great stopping power) and what brakes ppl recomend.
Although i should be doing timing belt i am holding off as i'm very near the Cultus engine rebuild (just need a vitara exhaust and rightangle kit ,date moved back to 201000), if the belt does go am i right in that it won't do damage to the stock head? i'm mainly concerned in not damaging the bottom end but i would like to sell the top after the conversion has been done.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fluids
I'm pritty sure thats incorrectsmall talk wrote:Pretty sure if the timing belt goes your piston will come up and hit your valves bending them. not entirly sure though.
Nothing happens if the belt lets go, had the little pin that holds the tensioner thingy in place break off and let my belt go slack the other day, worried the heck outta me as it was only a 5 day old engine from rebuild
Yep zook motors are failsafe!crispy wrote:I'm pritty sure thats incorrectsmall talk wrote:Pretty sure if the timing belt goes your piston will come up and hit your valves bending them. not entirly sure though.
Nothing happens if the belt lets go, had the little pin that holds the tensioner thingy in place break off and let my belt go slack the other day, worried the heck outta me as it was only a 5 day old engine from rebuild
my bottom actula timing belt pully came of once
and i striped a timing belt yesterday on its first drive on lux diffs!
so yeah fail safe they are!
santos, as long as you are running a standard engine eg, g13ba or a, they are a non interference engine, meaning that the piston at TDC and the valves right down, they cant touch, meaning nothing will happen if it breaks.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Who is online
Users browsing this forum: No registered users and 0 guests