Have just removed my 1" spring spacers and replaced them with 2" lift springs. I have only gained about 5mm of lift and was thinking of putting the spacers in on top of the new lifted springs to give me a total of 3".
Was just wondering if anyone has done a 3" lift on the rear and if there are any problems in doing this. Obviously the back will sit slightly higher than the front (torsion bars cranked and bump stops chopped) but wouldn't mind the extra inch on the back.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3" Suspension Lift
Moderator: -Scott-
Who is online
Users browsing this forum: No registered users and 0 guests