Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Whats the offset on these muthers

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 654
Joined: Thu Nov 28, 2002 10:04 am
Location: Central Coast

Whats the offset on these muthers

Post by Bentzook »

Does any one know the size & offset of these mothers ? Im looking at a set of 285/55/ for these.
You do not have the required permissions to view the files attached to this post.
"Gravitron " : drives the first layer of Gravity
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

what rig are they off, this will make it a bit easier to identify the size etc
Ransom note = demand + collage
Top
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

They are the 40 inch procomps of one of the rentals that becca drove??
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

If i remember today i will take a measurment. But from memory the offset is a lot. We had to run spacers on it. They could be 5".
Top
Posts: 654
Joined: Thu Nov 28, 2002 10:04 am
Location: Central Coast

Post by Bentzook »

So they could be these

ProComp 1079
Size: 20x9
Backspacing: 5"
Bolt Circle: 6X5.5
PXA1079-2938

I`m looking at these for my road tyres

Radial All Terrain T/A KO
LT285/55R/20 All Terain KO
BFG82915

From looking at this pic, you`ve only just been able to do the nuts up
You do not have the required permissions to view the files attached to this post.
Last edited by Bentzook on Thu Dec 22, 2005 9:01 am, edited 2 times in total.
"Gravitron " : drives the first layer of Gravity
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

That sounds like the rim. Pro comp in Victoria supplied these rims so they should be able to tell you exactly what they are.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest