I believe I have posted similer Q but this is different...
Well after fitting my extended Brake lines adter my lift I blead the brakes and all seemed fine But then,
On my way back to work i could smeel brakes and when i pulled over the fronts were smoking they were Nearly on fire..
Now after Calling in a mate to look at it as well we took calipers off and made sure they were ok and checked obvious things but still issues..
When pushing the Piston back into the Caliper it goes in fine Until You push the brakes and bleed it up.. Then the pressure wont release out of the piston, Both sides on front.. Crack the bleed nipple and it compresses fine.
Just seems like the Front brakes are keeping presure and not releasing when you take foot off pedal..
My master cylinder is leaking where it mounts to booster. COULD this be the problem?? Could it not be releasing presure??
Also when bleeding the GQ brakes (all Disc's) is it just like normal? start L/R then R/R, L/F Then R/F? Furthest to closest... Do you touch the Load
sencing thing above diff? there was/is no air in system and we flushed the fluid.
SORRY for such a long post but it was the only way to really say what the problem is..
Cheers
STEWIE...
MERRY XMAS TO ALL!!!!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ Mav Front brake Issues...
Who is online
Users browsing this forum: No registered users and 2 guests