Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

how to lift gq rear bar 50mm

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 325
Joined: Sun May 08, 2005 4:55 pm
Location: melbourne

how to lift gq rear bar 50mm

Post by mudmav »

hey guys done a body lift wondering how to lift standard bar 50mm?

thanks in advance
andrewholmes
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

unbolt it all and bolt into the higher set of bolt holes, once you start you will see its very easy. the loop in the middle of the ally is no longer usuable at all tho as it is held by only two bolts.
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Fit it the bottom bolts of the bar to the top holes of the chassis and only fit 2 bolts. If that makes sense.
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 36
Joined: Tue Aug 02, 2005 4:25 pm

Post by Wotto »

yeah ok, but what about the two side bits with the lights in em?
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

bolt them back into the ally centre section then tack the brackets into place, is the quickest fix.
Top
Posts: 194
Joined: Mon Mar 29, 2004 7:03 pm
Location: NOW IN TOWNSVILE

Post by skippy's GQ »

also u can swap the side bracket left to right and flip them upside down and they will bolt back up in place
:armsup:
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D

www.roverpark.com
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

skippy's GQ wrote:also u can swap the side bracket left to right and flip them upside down and they will bolt back up in place
:armsup:
Hmmm, good one, didn't know you could do that!
Top
Posts: 194
Joined: Sun Apr 13, 2003 4:01 pm
Location: Melbourne

Post by Boopa »

beretta wrote:
skippy's GQ wrote:also u can swap the side bracket left to right and flip them upside down and they will bolt back up in place
:armsup:
Hmmm, good one, didn't know you could do that!
did this myself this arvo... while they do sort of flip, they needed a couple of big whollops with the pusuader for the inner barckets to align with the bumper end bolt holes. Not the best fit inside, but ya wouldn't know once put back together. ;)
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 148 guests