I am a nissan driver,but I have an ex army landrover amunition trailer. Its an awsome bit of gear and I am building it into a camp trailer.I want to swap the hubs for a set of nisasan ones. the hubs on it have the large centers with the grease nipples on. My question is will they fit any other truck besides a landrover.
Cheers .....Vic
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
landrover hubs
Moderator: Micka
hubs
a mate of mine was going to do the same thing until he saw the size of the bearings,he said they were huge and decided to stick with them.although it would be easier for spare wheels with the nissan hubs,i don't think the hubs will fit anything else.
As said above, the stock hubs have huge bearings. If you want to convert them to 6-stud, it would be better to try and remove the studs and drill them to take the nissan/toyota 6-stud pattern (don't know if it is possible though).
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Who is online
Users browsing this forum: No registered users and 1 guest