Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bushwacker cut out style fender flares

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Bushwacker cut out style fender flares

Post by Nat84 »

dose anyone know where i can get a set of Bushwacker cut out style fender flares for Mazda b2600
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Im pretty sure Overkill can get the zook style so he should be able to get the Mazda ones if they are available.
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

i'am after the ones that is on this mazda B2600
You do not have the required permissions to view the files attached to this post.
Last edited by Nat84 on Thu Dec 29, 2005 9:33 pm, edited 2 times in total.
Top
Posts: 1397
Joined: Sat May 29, 2004 6:58 pm
Location: West Australia Posts: Less than DeWsE

Post by jeep97tj »

:shock: thats a serious looking mazda :cool: can u get them for subaru brumbys?
Shane
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

not shore if you can get it :cry:

i'am looking for my B2600 but i think that BIG one is in the US
Top
Posts: 215
Joined: Mon Aug 09, 2004 9:32 pm
Location: Ipswich

Post by 92mav »

thats a serious looking mazda can u get them for subaru brumbys?
not real serious no tailshaft if you look closely
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Prob IFS too.

Wot u dreaming up Shane.

Thanks

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

not yet the guy that owns has a Wish list.

this is what is dun:
Current Items
1982 Toyota 8" front and rear axles 4.10 gears
Toyota gear driven Transfer Case
Advance Adapters Toyota Tcase to TH350
TH350 Transmission
3.8L Buick V6 231c.i.
38.5"/16R15 Mickey Thompson Baja Claws
15"x10" U.S. Wheels with 2.25" backspacing
All-Pro standard cross over steering arm
All-Pro Toyota FJ80 Tierod taper adapter
Toyota stainless extended brake lines
Pro-Comp 34" extended travel shocks
Custom leaf packs in front
4" blocks, 2"add-a-leaf,1.5" shackles in rear
3" body lift
Custom rear shock mounts
Ford F250 front shock mounts
Bushwacker cutout style fender flares
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

this B2600 is not IFS it is SOLID AXLE
You do not have the required permissions to view the files attached to this post.
Top
User avatar
DamTriton
God of Athiests
Posts: 8337
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Nat84 wrote:not yet the guy that owns has a Wish list.

this is what is dun:
Current Items
1982 Toyota 8" front and rear axles 4.10 gears
Toyota gear driven Transfer Case
Advance Adapters Toyota Tcase to TH350
TH350 Transmission
3.8L Buick V6 231c.i.
38.5"/16R15 Mickey Thompson Baja Claws
15"x10" U.S. Wheels with 2.25" backspacing
All-Pro standard cross over steering arm
All-Pro Toyota FJ80 Tierod taper adapter
Toyota stainless extended brake lines
Pro-Comp 34" extended travel shocks
Custom leaf packs in front
4" blocks, 2"add-a-leaf,1.5" shackles in rear
3" body lift
Custom rear shock mounts
Ford F250 front shock mounts
Bushwacker cutout style fender flares
Any reason he's not using the Aussie 3.8 with T700/4L60E?? He could have problems getting it regoed if it doesn't have appropriate emmissions gear, and an engine not older than the chassis. Holden have done a heap of work on smoothing out the 3.8 (moving conrods, upped the compression ratio, different bearing surfaces/sizes, etc) and have optimized it for our better fuels (US standard unleaded 85-87 RON, premium unleaded 91-93 RON). No point in fitting an inferior development of the same engine.

The T700/4L60E can be beefed up and supplied with a manual overide on the gears(Advance Automatics, Bayswater, Vic), and although not cheap is apparently quite strong. T700 were reknown early on for not being the strongest box on this earth, as the power of the 3.8 increased over the years so did the strength of the box, not quite good enough for extreme 4wd work but vastly better than they were originally.

Cutout flares you might be looking for (soft rubbery ones) are available from Pirahna in Bayswater, Vic. They are made for Suzuki Sierras .
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

Gary, I believe the Mazda in the pics is from the USA, hence no Aussie option on motors.
As for Bushwacker Cut-out flares, www.summitracing.com sell the Bushwacker range, and were fairly cheap when I was looking for some for my F Truck. Although in the end, I looked on www.ebaymotors.com and looked up bushwacker, and asked the suppliers if they had my particular ones in stock, and bought them of them.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest