Gday all I have just found this forum and think its great
I have a 91 NH paj with a magna v6 and would like to get
a bit more grunt out of it does anyone have any ideas
to get better performance out of it without going over the top
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
more grunt wanted
Moderator: -Scott-
Basically you can squeeze some more out of it.
I added Genie extractors with a V8 Crudadore catalytic converter running through a 2.25" exhaust with a high flow muffler.
I had the car dyno tuned very soon after and they tinkered around with some of the EFI settings. Power went from 76Kw to 93Kw at the rear wheels. Mine already ran a snorkel with Finer Filter (foam) and Magnecore 8.5mm (KV85) ignition leads. It was a very noticeable improvement.
You can get a chip for the ECU (various aftermarket suppliers) and a 60mm throttle body (standard is 54mm) from RPW - www.rpw.com.au in WA. But I think they will only yield higher rpm power the 3.0 V6 needs more low down torque.
I guess major work would involve raising the CR and cam regrind to give it more mid range grunt. The other option would be a supercharger but thats $$$ unless you can buy a 2nd hand unit off Ebay and do a lot of the work yourself.
I added Genie extractors with a V8 Crudadore catalytic converter running through a 2.25" exhaust with a high flow muffler.
I had the car dyno tuned very soon after and they tinkered around with some of the EFI settings. Power went from 76Kw to 93Kw at the rear wheels. Mine already ran a snorkel with Finer Filter (foam) and Magnecore 8.5mm (KV85) ignition leads. It was a very noticeable improvement.
You can get a chip for the ECU (various aftermarket suppliers) and a 60mm throttle body (standard is 54mm) from RPW - www.rpw.com.au in WA. But I think they will only yield higher rpm power the 3.0 V6 needs more low down torque.
I guess major work would involve raising the CR and cam regrind to give it more mid range grunt. The other option would be a supercharger but thats $$$ unless you can buy a 2nd hand unit off Ebay and do a lot of the work yourself.
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 0 guests