Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
HELP!!! 9500xp probs
Moderator: -Scott-
HELP!!! 9500xp probs
Hey, was in a bit of a bingle in which a honda Jazz ran into the drivers side front guard of my 80 and pushed it across several inches. Ive had it all fixed, however, my xp is making noise and bogging down when it is winching out only. It never made any noise previously, and Im hoping it hasnt bent the drum. Im going to spool right out and in again under load but just wanted to see if this sounds familiar to anyone? When winding in it seems fine... Got me stumped!
" Some days you are the bug; some days you are the wind screen"
Did your bullbar get tweaked in the accident? If this is not straight where the winch bolts up it will be creating misalignment through the winch assembly and it maybe rubbing somewhere?
I'm not very knowledgeable on low mounts but I'm assuming the internal brake works differently when spooling out/in and hence maybe the cause of your problem also.
PM Lockee from here, he'll be able to help
I'm not very knowledgeable on low mounts but I'm assuming the internal brake works differently when spooling out/in and hence maybe the cause of your problem also.
PM Lockee from here, he'll be able to help
The bar did get tweaked, but only on the drivers side. It had been reinforced with 20mm steel behind the winch so the rest of the bar bent but not at that point. Im going to run it out and in again, and maybe take it off over the week end but lll PM Lockee to see what he thinks. Thanks for your reply, Ill keep you posted...
" Some days you are the bug; some days you are the wind screen"
Yeah, thats what im thinking which would probably be a better option. More of a PITA than a prob. Might have to strip it down and check it out. Anyway, Ill let you know what happens. Just trying to find time over Chrisi in between the relo bash's...
" Some days you are the bug; some days you are the wind screen"
Yeah, thats what im thinking which would probably be a better option. More of a PITA than a prob. Might have to strip it down and check it out. Anyway, Ill let you know what happens. Just trying to find time over Chrisi in between the relo bash's...
" Some days you are the bug; some days you are the wind screen"
Just thought Id let you know how I went. I pulled the winch out and the motor off. After pulling it down, there was a bit of corossion in there and a bit of sludge. So I guess it was just a coincedence and Roldit, you were right. Ive replaced bearings and cleaned up the stater, poles and brushes. Works awesome again. Thanks for your response all, and Lockee see PM.
" Some days you are the bug; some days you are the wind screen"
Who is online
Users browsing this forum: No registered users and 3 guests