can i assume that the length of the wheel studs in the rear drums are the same length as those in the front wheel spindle. ie. are they exactly the same bolt/stud design. I want to replace all of them but have not taken the front spindles out yet.
thanx for your help
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
94' sierra wt wheel studs
Re: 94' sierra wt wheel studs
Most front wheel studs are slightly longer than the rears when stock.Geoffrey Dick wrote:can i assume that the length of the wheel studs in the rear drums are the same length as those in the front wheel spindle. ie. are they exactly the same bolt/stud design. I want to replace all of them but have not taken the front spindles out yet.
thanx for your help
I used front studs on rear of mine, too allow for the extra thickness of rear disc conversion.
I can only assume this is true in all zook models?
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
Who is online
Users browsing this forum: No registered users and 0 guests