I have 2 pairs of 80 series front springs, and the springs within each pair are different...
In both pairs one spring has about 60 degrees of a loop more than the other. This spring is slightly higher also by about 5 - 10mm.
So are they made differently for a reason? Maybe the weight of the driver? Or is it just chance?
The fact that both pairs are like this makes it seem like they're made this way.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series front springs aren't the same?
Moderators: toaddog, Elmo, DUDELUX
80 series front springs aren't the same?
1986 2L-T Bundera
Like BBM Rick said, and I would assume the longer one would go into the drivers side to compensate for his/her butt.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Who is online
Users browsing this forum: No registered users and 0 guests