Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Good engine builder in eastern suburbs - VIC/engine exchange
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Good engine builder in eastern suburbs - VIC/engine exchange
I'm looking for an engine reconditioner for a toyots 2H diesel.
I've been quoted $5500 from Orger engines, unfuelled. He suggested injector/pump rebuild would likely cost ~$2500, which i though sounded a bit pricey?
HM Gem engines quoted $5750 for a bare long motor. (i didn't think to ask, but i presume this ISN'T exchange). I've heard bad things about HM GEM - anyone care to comment?
Couldn't find much on the net apart from Bernie Parts who exchanges a fuelled long motor for $5730. I think these are an imported reco motor.
Who else should i consider? Both for a reconditioner or exchange motor?
I fear an exchange motor could prove to be low on quality - are my fears justified.
Any help appreciated.
-Stu
I've been quoted $5500 from Orger engines, unfuelled. He suggested injector/pump rebuild would likely cost ~$2500, which i though sounded a bit pricey?
HM Gem engines quoted $5750 for a bare long motor. (i didn't think to ask, but i presume this ISN'T exchange). I've heard bad things about HM GEM - anyone care to comment?
Couldn't find much on the net apart from Bernie Parts who exchanges a fuelled long motor for $5730. I think these are an imported reco motor.
Who else should i consider? Both for a reconditioner or exchange motor?
I fear an exchange motor could prove to be low on quality - are my fears justified.
Any help appreciated.
-Stu
Those price's make's the rebuild kit on ebay sound cheap at $900
http://cgi.ebay.com.au/LANDCRUISER-2H-R ... dZViewItem
http://cgi.ebay.com.au/LANDCRUISER-2H-R ... dZViewItem
Last edited by Hamo on Thu Jan 05, 2006 6:31 am, edited 1 time in total.
hm gem
i got a hm gem engine, change over on my 22r cost 1200 so i wasnt that annoyed but they couldnt build that properly so i would not trust them with a diesel. they are just a budget rebuild.
what about a 1hz? get a low ks from a wreckers... maybe?
what about a 1hz? get a low ks from a wreckers... maybe?
FJ 73, army green ,snorkel, high mount, dual bats,draws,
fuck good time for a v8 or ford 6 conversion and lpg. typical over priced toyota engine rebuild prices steer clear of gem for sure. thay have the best machines for engine reco but nothing is ever cleaned propely ect typical mass produced crap. have put plenty in for customers over the years and sent plenty back with stuff like allen key style head bolts and stuff half full of old crap from the last engine thay were in ect
range rover & series one landy!
Who Rebuilt this Stonking 2F?
Engine Builders Details are as follows:
http://www.tdcengines.com/
TDC Engines
5/13 Turbo Drive
Bayswater N
9720 7620
Vic 3153
Refuses to give the secrets of this engine away but happy to build another just like it Cost around $4000 last year.
http://www.outerlimits4x4.com/PHP_Modul ... p?id=17535
This guy takes pride in his work and even though mine is not a diesel he can build one hell of a torquey motor. Worth a call and a chat though quality is not always cheap.
In conjunction with my mechanic Chris
New Car Service Center ( he does old cars too )
1 Richard Street
Mitcham
9872 3677
I have no problems at all recomending both very highly. Chris has over seen most of the modifications and now knows FJ40's Inside out
Engine Builders Details are as follows:
http://www.tdcengines.com/
TDC Engines
5/13 Turbo Drive
Bayswater N
9720 7620
Vic 3153
Refuses to give the secrets of this engine away but happy to build another just like it Cost around $4000 last year.
http://www.outerlimits4x4.com/PHP_Modul ... p?id=17535
This guy takes pride in his work and even though mine is not a diesel he can build one hell of a torquey motor. Worth a call and a chat though quality is not always cheap.
In conjunction with my mechanic Chris
New Car Service Center ( he does old cars too )
1 Richard Street
Mitcham
9872 3677
I have no problems at all recomending both very highly. Chris has over seen most of the modifications and now knows FJ40's Inside out
http://www.fj40-2f-eti-locked-n-loaded.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
SMS Diesel Spares?
Thanks all for the reply's! I didn't think $5500 was a bad price, just the $2500 estimate for the pump/injectors.
I'll give some of these places a call.
How bad are the import reco's? Just as bad as HM Gem's? I'll definately steer clear of HM given they're only $250 short of Orger's price.
-Stu
EDIT: I calles Bernie parts branch in Cambellfield, who trade as SMS Diesel Spares. They claim the engines are manufactured in sydney. I've been given some fairly attractive quotes by these guys - has anyone had any experience with these engines?
I'll give some of these places a call.
How bad are the import reco's? Just as bad as HM Gem's? I'll definately steer clear of HM given they're only $250 short of Orger's price.
-Stu
EDIT: I calles Bernie parts branch in Cambellfield, who trade as SMS Diesel Spares. They claim the engines are manufactured in sydney. I've been given some fairly attractive quotes by these guys - has anyone had any experience with these engines?
Haha, who's this?! I'm just considering the costs involved at this stage.smokem wrote:this for the troopy stu? Any word on whether or not you gunna get it?
EDIT: ahh now i know! Have you noticed Syzygy's bundy is nearly identical to yours?
--------------------------
Thanks again for the replie's everyone, i'll give hiflo a call on monday.
Is there still noone out there who's had experience with one of these SMS Diesel exchange motors?
Who is online
Users browsing this forum: No registered users and 6 guests