Anyone know the diameters of the turbo/intake holes? I need to size up new tubing and don't have the truck near me.
Application is 1996 110 300Tdi.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
300Tdi intercooler hose diameter?
Moderator: Micka
300Tdi intercooler hose diameter?
-Art
97 D90 SW, 96 110 300Tdi, 93 LWB
97 D90 SW, 96 110 300Tdi, 93 LWB
Intercooler Hose
I recently gained some help from local auto trade supply store. Experienced salesperson took one look at the hose I took in, went out the back and brought out a short length of fuel hose for I believe a caterpillar bulldozer. Fitted perfectly.
You could probably pick up a short length from a caterpillar service agent if you have one nearby
You could probably pick up a short length from a caterpillar service agent if you have one nearby
Intercooler Hose
I recently gained some help from local auto trade supply store. Experienced salesperson took one look at the hose I took in, went out the back and brought out a short length of fuel hose for I believe a caterpillar bulldozer. Fitted perfectly.
You could probably pick up a short length from a caterpillar service agent if you have one nearby
You could probably pick up a short length from a caterpillar service agent if you have one nearby
Hi Art
the diameter of the inlet manifold intake, and intercooler outlet is 48mm
We use silicon hose, Usually available from industrial suppliers. Lasts longer and doesn't get harmed by oil etc.
JC
the diameter of the inlet manifold intake, and intercooler outlet is 48mm
We use silicon hose, Usually available from industrial suppliers. Lasts longer and doesn't get harmed by oil etc.
JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Who is online
Users browsing this forum: No registered users and 2 guests