Hey all, been reading through all the tech info on fitting 60 series components to a 40 series. What a wealth of information.
I have just bought a complete running and registered 60 series that I am planning on using for parts for one of my 40 Shortys and have started measuring up the diff housings.
It looks like the track is about 70mm wider than the 40, this I'm thinking is a good option. But when looking at the spring mounts, it looks like these need to be cut and moved.
The 60 looks like it is about 70mm wider than the 40.
Can the mounts be modified to suit, do they have to be? Looking at the drivers side mount, it doesn't look like it can go any further to the centre as it would be riding up the pumpkin. I'm sure it can be done as I have heard and read posts here of 60 diffs in a 40.
How do I do this?
Cheers
Corry
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 Series Diffs into a 40 Series Shorty
Moderators: toaddog, Elmo, DUDELUX
60 Series Diffs into a 40 Series Shorty
'98 80 4.5/Auto 40th Anniversary - Tour
'92 80 6.5V8TD/Auto/37's - Toy
VE HSV Senator 6.2/Auto - Play
'92 80 6.5V8TD/Auto/37's - Toy
VE HSV Senator 6.2/Auto - Play
cut the old perch's off the housing, get new ones ( can buy or u can make them) work out were they need to be making sure the pioion angel is right. weld and fit back to cruiser. done
thats it in a nut shell...... i think
thats it in a nut shell...... i think
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Yeh can be done and have done a few times the saddle does ride up the pumkin and the U-bolt wont fit between the spring and the centre when bolted in. I done it with 75 series spring perches, saddles and U-bolts.
The rears no problems at all.
Wally
The rears no problems at all.
Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Who is online
Users browsing this forum: No registered users and 0 guests