Hi all, I'm new here and need a bit of advice.
I have tried the search, and also checked the tech bibles, but not found what i am after.
I saw a post or two regarding swapping the G13BA from the SJ80 coily for the G13BB from the early Jimnys.
What I want to know is; will it be a straight bolt in mod (besides the ecu wiring) or is there more to it? What sort of dollars will the engine set me back.
Besides the efi, is there a benefit? more hp? better fuel econ?
I have the 1.3 at the moment, with extractors and a decent exhaust, and a holley 180 to feed it. it goes well as is, but i'm looking for more.
Also i was hoping to install the air con unit from the jimny as well, and the power steering down the track, is this possible? (before you say "why don't you just get a jimny" i'll answer; They're ugly)
Anyways, any help is appreciated. Thanks!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Jimny G13bb into SJ80
The BA and the BB engines are very similar except for induction. It (should) be a straight bolt in.
There will be some complications with the wiring though - you will have to set up the VSS ( I have done this by fitting a vitara efi speedo into a sierra gauge cluster, an all but bolt in)
Likewise, I believe that jimny power steer is a bolt in too.
however, I would be surprised if the motor felt much stronger than your holley + extractor equipped BA. There have also been some durability questions raised about the BB motors, particulary in relation to bore longevity.
If you were chasing efi drivability and stock motor convenience, for sure I would say go with the BB, but for power, there would have to be a better outcome by building a hybrid with a swift GTI head or similar, for the same or less money.
There will be some complications with the wiring though - you will have to set up the VSS ( I have done this by fitting a vitara efi speedo into a sierra gauge cluster, an all but bolt in)
Likewise, I believe that jimny power steer is a bolt in too.
however, I would be surprised if the motor felt much stronger than your holley + extractor equipped BA. There have also been some durability questions raised about the BB motors, particulary in relation to bore longevity.
If you were chasing efi drivability and stock motor convenience, for sure I would say go with the BB, but for power, there would have to be a better outcome by building a hybrid with a swift GTI head or similar, for the same or less money.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
it is a strait bolt in.
the airbox needs brackets made.
use the sierra gearbox.
wiring is very easy to do,you can use the whole loom and just change some plugs, or strip the crap out and just use the engine loom.
the power steer goes strait on with no probs.
the air cond will not fit. not the under dash parts anyway.
as for power i have to DISAGREE with above.i pick these over a 1.6 efi anyday. actually i just picked it over a v6 vitara engine also. these have very good power and are smoother than a 1.6.
not being easy to find the 13bb can go from $1000 to $2500 price being reasonably. but you need to ask yourself with the higher end of the dollar side, do i want to go a 1300 or a 1600.
the airbox needs brackets made.
use the sierra gearbox.
wiring is very easy to do,you can use the whole loom and just change some plugs, or strip the crap out and just use the engine loom.
the power steer goes strait on with no probs.
the air cond will not fit. not the under dash parts anyway.
as for power i have to DISAGREE with above.i pick these over a 1.6 efi anyday. actually i just picked it over a v6 vitara engine also. these have very good power and are smoother than a 1.6.
not being easy to find the 13bb can go from $1000 to $2500 price being reasonably. but you need to ask yourself with the higher end of the dollar side, do i want to go a 1300 or a 1600.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Who is online
Users browsing this forum: No registered users and 2 guests