Hi guys,
About 6months ago I had a engine conversion in Bundy. It now has a rebuilt 22RE. Lately I had major efi problems and changing the ecu, afm etc didnt solve the problem.
Anywayz I have got sick of trying to fault find the problem. I had a mate whos a auto elect and a electronic engineer have a look and got them buggered. So i decided to run aftermarket mangement and I bought a brandnew Wolf 3d Version4.
Hopefully this will solve the problem.
Anyway I am thinking about down the track doing something different and turbocharging my 22RE.
I just need to know what the standard compression ratio is in a 22RE?
Also Im thinking of only running 7 or 8psi.
Should the standard head gasket be able to cope?
Should it be ok to run boost on this engine as I think its 9:5 anyway. Or will I need a decompression plate.
Sorry for the long post
Any advice would be greatly appreciated
Cheers
Doddy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bundy Efi Turbo question
Moderators: toaddog, Elmo, DUDELUX
if you dont exceed 7 ps1 (.5bar) you should be fine but make sure it is tuned for the boost also have you considered a toyota blower from one of those 1gtze motors can pickem up for about 3hunge suitable for up to 4 litre
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
Standard 22R and 22RE compression is 9.0:1
If you can find a 22R-TE compression is 7.5:1 it is a different block, head and crank and very hard to find in Australia, although common in USA.
If I was you I would call some engine workshops and speak to them as to whether or not the standard head and gasket will be able to handle it
Harry
If you can find a 22R-TE compression is 7.5:1 it is a different block, head and crank and very hard to find in Australia, although common in USA.
If I was you I would call some engine workshops and speak to them as to whether or not the standard head and gasket will be able to handle it
Harry
reg supercharger
Originally I was going to go a supercharger like a toyota sc14 but probably wouldnt be the efficent because the 22r is a big 4 cylinder.
Also there is messing around with brackets and pulleys.
I can get a custom manifold made and have a more responsive and power output engine going turbo. It should also create boost very quickly.
I was originally going to use a Garett T25g like off a nissan sr20det but they guy whos installing the wolf, thinks this might be abit too small for the capacity of the 22re being 2.4 litres. He Suggests using a Garett Gt-28R or something like that.
Can you give me any advice what Turbo I could use or whether he seems right??
Cheers Doddyz
Also there is messing around with brackets and pulleys.
I can get a custom manifold made and have a more responsive and power output engine going turbo. It should also create boost very quickly.
I was originally going to use a Garett T25g like off a nissan sr20det but they guy whos installing the wolf, thinks this might be abit too small for the capacity of the 22re being 2.4 litres. He Suggests using a Garett Gt-28R or something like that.
Can you give me any advice what Turbo I could use or whether he seems right??
Cheers Doddyz
Who is online
Users browsing this forum: No registered users and 1 guest