Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2.8 turbo
Moderators: toaddog, Elmo, DUDELUX
2.8 turbo
looking into putting a DTS turbo onto a 94 hilux 2.8. The vehicle has done 240000 kms on original engine. Is there any problems that anyone knows of with either the DTS turbo, or putting one on? The car has been looked after really well, oil every 5000kms, no smoke blown!
cheers
cheers
94 hilux 2.8td 3 inch lift, 33" MTR's, arb bars, f & r lockers, etc
would not go to 15psi if you drive it dailly will shorten the life and could blow the bottom end. I run mine at 10 psi and i would only go to 15psi if i ran 35s and only adjustable so on the street change back to 33s and 10 psi
LANDCRUISER GXL 80series 4.2TD
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
Still running the same clutch in mine, turbo has been on for the last 3 years. It compensates for my lack of gearing offroad as well!! so it cops a beating.plowy wrote:save up for a new clutch as a turbo on a old clutch usually finishes it off faster than usual
due to the extra bit of get up n go
Im running at about 11-12 psi, highest EGT is about 550c (steep hill in 5th).
Yurich Design Services
www.yds.net.au
www.yds.net.au
2.8 turbo
cheers guys for your help, it's getting put on, on monday so should be good. Prob have to get the clutch looked at!! i'd say it will cook!!
94 hilux 2.8td 3 inch lift, 33" MTR's, arb bars, f & r lockers, etc
Who is online
Users browsing this forum: No registered users and 4 guests